Filter
Top Products
2-7
Cisco 827 and SOHO 77 Routers Hardware Installation Guide
78-6854-03
Chapter 2 Installation
Installing the Router
4. Connect a terminal or PC to the router for software configuration using the command-line interface
(CLI) or for troubleshooting.
5. Connect the router to the power source.
6. Verify the links using the router LEDs.
Connect Ethernet Devices
Table 2-2 lists the Ethernet devices you can connect to Cisco 827, Cisco 827-4V, and SOHO 77 routers;
the connections for eachdevice; and the settingsof the router TO HUB/TO PC button (thedefault setting
is IN).
Table 2-2 Ethernet Device Connections for Cisco 827, Cisco 827-4V, and SOHO 77 Routers
Network Device
Connected To Router Router Port
Ethernet Cable
Type
1
1. Cisco provides a yellow straight-through cable. You provide crossover or additional straight-through cables. For details on
cables, see Appendix A, “Specifications and Cables.”
RouterHUB/NO
HUB Button
Setting
Network Device
Button Setting
2
2. Hub vendors choose different names for the button that controls the cable selection. This table uses the
Cisco 1528 Micro Hub 10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your
particular hub. Refer to your hub documentation for details.
Hub with equivalent to
router TO HUB/TO PC
button
ETHERNET port 1 Straight-through IN MDI (IN)
Hub with equivalent to
router TO HUB/TO PC
button
ETHERNET port 1 Straight-through OUT MDI-X (OUT)
Hub without equivalent
to router TO HUB/TO
PC button
ETHERNET port 1 Straight-through OUT MDI-X (OUT)
Server, PC, or
workstation
ETHERNET port 1 Straight-through OUT –