Filter
Top Products
2-10
Cisco 827 and SOHO 77 Routers Hardware Installation Guide
78-6854-03
Chapter 2 Installation
Installing the Router
Connecting a Server, PC, or Workstation
Before connecting a server, PC, or workstation to the router, see Table 2-2 on page 2-7 to determine how
to set the router TO HUB/TO PC button.
To connect a server, PC, or workstation to the router, follow the steps in Figure 2-4 on page 2-10.
Figure 2-4 Connecting a Server, PC, or Workstation to the Router
To verify the connection, check that the Ethernet 1 LED is on after you complete the router installation.
ETHERNET
TO HUB
TO PC
+5,+12,-12,-24,-71 VDC
1
CONSOLE
Model Cisco 827-4V
ADSL
PHONE
2
143
TO HUB
TO PC
+5 VDC
321
ETHERNET 10BASET
Cisco 827 H
ADSL
CONSOLE
4
3. Connect other end of cable
to server, PC, or workstation.
PC
74116
2. Connect yellow cable
to ETHERNET 4 port
on router.
2. Connect yellow cable
to ETHERNET 4 port
on router.
1. Set TO HUB/TO PC
button.
1. Set TO HUB/TO PC
button.
Cisco 827, 827-4V
and SOHO 77
Cisco 827H and
SOHO 77H