Filter
Top Products
21
Push the Q.R. axle through the hollow wheel axle and screw on the nut. Both Q.R. springs must be located on each side of
the Q.R. axle in such a way that the narrower side of the spring points towards the centre of the rear wheel hub.
The assembled jogging stroller (base + jogging kit) – example Cougar1
Parts supplied:
Jogging kit: 16” wheel and two wheel
arms with ‘click system’
Hold the wheel arm with the bar cur-
ving towards the centre of the trans-
porter and the wheel slot pointing
downwards. Push the arm into the
hitch arm attachment bracket.
To insert the wheel arms depress the
smaller knob and push the wheel arm
in until the big button engages.
3.1 Fitting the Jogging Kit
3. The Jogging Kit
Tip the transporter backwards and rest it on the handlebar. Then insert the wheel
into the slots.
Close the Q.R. lever.
In order to ensure that the hub is clamped sufficiently in the slots, the Q.R. lever must begin gripping as it moves from the open to
the middle position, and approaching the closed position you should clearly feel resistance as you tighten. If it is too easy or too
difficult to move the quick release lever, tighten or loosen the Q.R. lock nut on the other side of the hub.