Filter
Top Products
ENGLISH
❃ Folding and Storing:
1 Step down on brake lever to lock
brakes.
2 Remove car seat from stroller
frame (see page 4).
NOTE: Car seat adapter may
remain on stroller when
folding.
3 Place seat back in its most
reclined position.
4 Release fold locks on each side
by grasping handle grips and
pressing on both buttons.
NOTE: This can be done with the
napper bar attached.
5 Continue pushing buttons
and lift handle to fold stroller.
SPECIAL INFORMATION
6
❃ Folding and Storing continued:
IMPORTANT:
• When folding stroller, turn stroller
front wheels to straddle frame.
• DO NOT allow front wheels to rest
on frame. Doing so will cause wheels
to warp and they will not roll correctly.
6 Engage latch on side of stroller to
retain stroller in folded position.
MAINTENANCE
Cleaning:
• Wipe fabric and frame with damp cloth and mild
soap. DO NOT USE abrasives, solvents, strong
detergents, or household cleaners; they can
weaken plastic.
• DO NOT machine wash or dry seat pads that
have boards in them.
• Comfort pad is removable and machine washable.
Machine wash in cold water, machine dry on cool
setting to prevent shrinkage. DO NOT wash with
other clothes.
• When replacing comfort pad, make sure harness straps
are threaded correctly through slots in comfort pad.
• Loop front of comfort pad over leg rest and fasten tabs.
WARNING
❃ Dented Wheels:
Sometimes wheels become “dented” from shipment or
normal use. You may try the following procedure for
repairing the dented wheel before calling our Consumer
Relations Department.
• Blow warm air from hair dryer over dented area for
1 to 3 minutes.
To avoid serious injury to child, periodically check
anchoring straps beneath seat pad to ensure they are
secured to frame.