Filter
Top Products
ENGLISH
5
STROLLER USAGE
❃ To Remove Car Seat Adapter:
WARNING
STRANGULATION HAZARD! Remove car seat adapter
BEFORE using as a stroller seat.
1 Squeeze tab in adapter bracket
to unlock bracket.
2 Pull adapter bracket out of handle
grip opening.
Repeat for opposite side.
3 Lift car seat adapter away from stroller frame.
Store car seat adapter for future use.
❃ Canopy Positions:
1 Canopy has three (3) positions:
WARNING
Prevent serious injuries:
• Make sure child is clear of any
moving parts when adjusting
stroller.
• DO NOT place parcels on top of
canopy.
Closed
Fully Opened
(for use as
stroller only)
❃ To Attach Napper Bar:
(Stroller can be used with or without Napper Bar.)
1
Align napper bar (flat side down)
with slots in lower part of handle
bracket.
2 Push napper bar into slots. Pull
napper bar to be sure it is locked.
3 To remove: push buttons on fold lock
and pull napper bar out
❃ Seat Back Positions:
• Seat back has two (2) positions:
- Upright
- Semi-reclined
1 For upright position: Lift seat back
forward until seat back pins hook
into seat back latches.
CAUTION: Be sure seat back is
latched onto seat back pins by
pushing down on seat back.
2 For Semi-reclined position: Squeeze
both levers on sides of seat back and
pull seat back down.
❃ To Secure Child:
WARNING
Avoid serious injury from falling or sliding out:
• Always use seat belt to restrain child, even when
sleeping.
• To prevent child from standing or sliding out of
stroller, be sure waist strap is always SNUG and on
child.
• Periodically check waist strap to be sure it is snug
around child’s waist.
1 Secure child with harness system.
• Pull waist straps around child’s waist
and place crotch strap between
child’s legs.
• Snap both buckle tongues into
buckle on crotch strap.
• Pull on waist straps to be sure they
are buckled and snug.
2 Adjust length of waist straps by loosening
or tightening as shown. Double check to
make sure strap does not slip out of buckle
tongues.
Halfway Opened
(for use with
car seat)
Buckle Tongue