Filter
Top Products
Using Parking Brake
Engage parking brake by pushing handle to the right. Exercise
caution when disengaging brake, as it may spring to the
left. PHOTO 3
Installing Tow Bar
1. Slide tow bar through both tow bar mounts on left side.
2. Match rear tow bar hole with rear mount hole.
3. Insert the retaining pin through both holes, and lock
retaining hoop securely. FIGURE 6
Installing Handle Bar Receivers
1. Using provided hex key wrench and handlebar screws,
install inner handlebar receiver sections on upper frame,
with narrow end of receiver sections toward trailer rear.
PHOTO 4 and FIGURE 7
2. Match outer to inner receiver sections.
3. Insert and tighten knobs.
PHOTO 3
FIGURE 6
PHOTO 4: Inner Receiver FIGURE 7
6 B UR LE Y HO NEY B EE O WN E R’ S IN ST RU CT IO N A ND SA FE TY MA NUA L
NEVER OPERATE TRAILER WITHOUT RETAINING PIN LOCKED IN
PLACE. AN UNLOCKED TOW BAR CAN LOOSEN OR DETACH,
CAUSING ACCIDENT RESULTING IN SERIOUS INJURY.
WARNING
Brake Handle Engaged
Brake
Front
Tow Bar
Mount
Retaining Hoop
Rear Tow
Bar Mount
Trailer Rear
Screws
Knob
Outer Receiver
Inner Receiver