Britax LATCHANCHOR Baby Carrier User Manual


 
Care and Maintenance
Cover Removal
1 Loosen the harness by lifting the adjuster lever while pulling the
shoulder straps forward as far as possible.
2 Unhook the shoulder straps from the yoke on the rear of child
restraint.
3 Pull straps through the shell and cover, to the front of the seat.
4 Lift cover over buckle.
5 Gently remove the upper portion of the cover, by releasing the elas-
tic loops. Be careful not to damage the energy absorbing foam.
6 Pull the harness straps and chest clip through the slots in the cover.
7 Release the elastic loops at the bottom of the cover.
8 Gently remove the entire cover from the seat.
WARNING:
Do not take apart or attempt to take apart the harness. It is
unnecessary and dangerous to do so.
Never remove the buckle tongues from the harness. They can-
not be reattached after removal.
Belly Pad Removal
1 Remove the buckle and belly pad (see page 36).
2 Slide belly pad off the buckle straps.
Refitting the Cover
To refit the cover, reverse Cover Removal directions.
Make sure that
the shoulder straps are threaded through the chest clips and that
the harness is not twisted.
35
FAGalaxy_page proof 2/9/02 11:17 AM Page 35