Filter
Top Products
1. Adjusting the child seat
Place the child seat on the fl oor.
Push the adjuster button in and at the same time pull BOTH shoulder straps
forward as far as possible (dia 1a).
Release the harness from the buckle (dia 1a inset).
To avoid the harness twisting, lay the shoulder straps over the sides of the
seat by placing the buckle tongues behind the elastic harness stowage straps.
Carefully place your child in the seat, fi
t the harness loosely around them and
re-fasten the harness buckle.
2
1
Pull the top of the footprop away from the back of the child seat
1
(dia 1b).
Lift the harness adjuster and move it up or down
2
so that the harness strap
slots in the headrest are level with or just above your child’s shoulders.
When the headrest is in the correct position let go of the
harness adjuster and ensure it has locked in to place.
Once you reach the top of the slots, your child may continue
to use the seat until their eye-level becomes level with the
top of the seat or their weight exceeds the following:
Rearward facing: 25kg
Forward facing: 18kg
Use the width adjuster (see ‘Introducing your new child seat’
on previous page) to adjust the width of your child seat.
1b
1c
1a
9-25kg
9-18kg
Britax_2h.indb 6 30/10/2007 16:23:49