Filter
Top Products
6. Installing your child seat (forward facing) with adult belt
15-25kgs Group 2 (approximate age 4 - 6 years)
Adjusting the child seat
To stow away the harness in the child seat,
first place the child seat on the fl oor.
Push the adjuster button in and at the same
time pull BOTH shoulder straps forward as
far as possible (dia 6a).
T
urn the seat around. Lift the harness
adjuster at the back of the seat and move
it up so that the shoulder strap slots in the
headrest are in the uppermost position (dia
6b).
Unhook both shoulder straps from the yoke
at the back of the child seat (dia 6c), stow
the yoke on the lower part of the belt shield
(dia 6g).
Remove the chest pads from the chest pad
attachment arms (dia 6c inset). Pull both
the shoulder straps and the chest pads
through to the front of the seat, remove the
chest pads from the shoulder straps.
Place the child seat on it’
s back. Remove
the adjuster strap from the bracket of the
crotch strap. Turn the bracket so that it will
go through the crotch strap and push it
through to the front of the seat (dia 6d).
Stand the child seat upright and release
the harness from the buckle (dia 6e inset)
.
Push the harness straps and buckle
tongues under the cover through the lap
belt slots (dia 6e).
Place the buckle, harness straps and chest
pads in to the elastic stowage straps (dia
6f). Push the adjuster strap through the slot
in the cover
.
6a 6b
Support the seat and squeeze the headrest
adjuster at the rear of the headrest (dia
6g). Check that the chest pads have been
removed as directed in (dia 6c) above.
Move the headrest up so that the head is
positioned centrally (dia 6h). When the
headrest is in the correct position let go
of the headrest adjuster
, check that it has
locked in to place.
6d
6f
6g
6h
6c
6e
Britax_2h.indb 16 30/10/2007 16:24:12