Britax 70 Car Seat User Manual


 
25
Rear-Facing Tether Connector Strap
Because every vehicle model is different, a
location to anchor the tether for rear-facing
installations may vary. Use the rear-facing tether
connector strap to assist in creating an anchor
point.
1 Find a fixed location in the vehicle that is
bolted to the floor.
* If you cannot find a location to create an
anchor point, contact the vehicle manufacturer to identify a tether
connection point.
2 Route the strap through the anchor point.
3 Thread the metal D-ring through the loop on the end of the
strap.
4 Pull the metal D-ring through
until the strap is tight.
5 Use the D-ring as an
attachment point for the tether.
NOTE: Store the tether connector
strap in the tether pouch when not
in use.
Child Seat Functions
OR
Rear-Facing Rear-Facing
OR
Forward-Facing