Filter
Top Products
REMOVE ACCESSORY BAR
TRAY INSTALLATION
REMOVE SCREWS
Using a Phillips screwdriver,
remove long screws from tray.
SECURE TRAY
Insert long screw through each hole in tray,
main bar and into nut on underside of tray.
Tighten rmly with Phillips screwdriver.
ROTATE TRAY
Rotate tray towards stroller seat
until it rests on main bar.
Hook tray onto
main bar.
ENGAGE TRAY
Children should not be
placed directly in the
BOB Stroller seat with
the ICSA installed, unless
tray is installed for
safety and protection.
Line up holes.
Using a Phillips screwdriver,
remove both screws.
TIP: Attach short screws to
accessory bar for future use.
CAUTION: Ends of accessory bar are sharp!
OMA09D P9