Filter
Top Products
Position arm between
canopy and frame.
Align arm hole over
fabric grommet and
rivet nut.
Position arm
between canopy
and frame.
Align arm hole over
fabric grommet and
rivet nut.
REMOVE SHARP
SCREW AND BELT
Using a Phillips
screwdriver, remove
sharp screw and
restraint belt M.
REMOVE RESTRAINT BELT M
REPLACE SHARP SCREW
POSITION ARM
Insert sharp screw
through end of arm,
fabric grommet and
into rivet nut.
Note:
If screw does not
turn easily, unscrew
and start again.
Tighten rmly with
Phillips screwdriver.
TIGHTEN SHARP SCREW
REMOVE SHARP
SCREW AND BELT
REMOVE RESTRAINT BELT F
REPLACE SHARP SCREW
POSITION ARM
Insert sharp screw
through end of arm,
fabric grommet and
into rivet nut.
Note:
If screw does not
turn easily, unscrew
and start again.
Tighten rmly with
Phillips screwdriver.
TIGHTEN SHARP SCREW
Using a Phillips
screwdriver, remove
sharp screw and
restraint belt F.
OMA09D P10