Filter
Top Products
11
CHAPTER 4: Installation
4. Installation
IMPORTANT
You MUST set up the operating system BEFORE you physically install
the Card.
4.1 Setting Up the Operating System
If you are installing the PCI adapter in DOS, OS/2
®
, or QNX, please refer to the
appropriate directory on one of the Serial Utilities Disks for instructions.
4.1.1 W
INDOWS
3.1
X
Refer to the Win3x.hlp file in the \Win31 directory on Disk 1 of the Serial Utilities
software.
4.1.2 W
INDOWS
95/98 U
SERS
If you are installing the PCI card in Windows 95/98, run setup on disk two of the
Serial Utilities Diskettes before installing the card. Power down the computer and
install the adapter. The resources are automatically configured for the PCI card.
Refer to the appropriate help file in the Black Box folder located in the Start,
Programs menu for changing those resources.
4.1.3 W
INDOWS
NT
If you are installing a PCI card in Windows NT, run setup on disk two of the Serial
Utilities Diskettes before installing the card. After the software installation is
complete, power down the computer, install the card, then power up. Since
resource allocation is automatic, the installation is now complete.
4.1.4 DOS
Refer to the Readme.txt file found in the \DOS directory on Disk 1 of the Serial
Utilities software.
4.1.5 O
THER
O
PERATING
S
YSTEMS
Refer to the appropriate directory on Disk 1 of the Serial Utilities software.