ASSEMBLY:
• Remove stroller from box. The front wheels, rear wheels, parent tray, and support
bars specic to your infant car seats need to be installed prior to use.
• To attach the front wheels, unfold stroller as described in the section following.
See gure 1.
Lean the stroller backwards so that it rests on the handle and rear frame tubes and
the front wheel tubes are pointing upward.
Position the front wheel assembly at the front tube such that the large hole in the
swivel assembly will slide onto the front tube. Push each front wheel assembly
onto the front tube being careful that wheel assembly locks onto the front leg.
Pull on the wheel assembly to ensure that it is securely attached to the stroller.
Please see gure 2.
• Lean the stroller forward to rest on the front wheels. To attach the rear wheels,
position the rear axle and wheel assembly such that the brake levers are facing to
the rear of the stroller. Press the rear wheel assembly onto the rear frame tubes
being careful that the push buttons on the forward side of each rear tube engage
the hole on the forward side of each rear wheel housing. Pull on the rear wheel
assembly to ensure that it is securely attached to the stroller. Please see
gure 3a.
Ensure that the wheels are rmly locked into place. Do Not use the stroller if
the wheels are not locked into place, but rather contact our customer service
department immediately at (800) 328-7363, between the hours of 8:00am and 4:
30pm PCT, for assistance
• To attach the storage basket, slide the U-shaped basket tube into the tubes at the
rear of the stroller. Push the tube in until the snap button pops through the hole
on the female tube. Please see gure 3b.
• To attach the parent tray, position the tray so that the warning statement on the
inside can be read from the normal position of pushing the stroller. Push the
tray male end ttings into the
plastic female ttings on the
inside of the stroller handle.
Check that the tray is securely
latched in place. Please see
gure 4. To remove parent
tray, pull upward on the tray.
Stroller
Front Wheels
Rear WheelsParent Tray
Screws
TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE
INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Fig. 1
Fig. 2
Fig. 3a
Fig. 5Fig. 6
Fig. 4
3
Fig. 3b