Filter
Top Products
DPF710K 3
Important Safety Instructions
Please read all safety and operating instructions carefully before installation, and keep these instructions handy for
future reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture: The unit should not be used near water. For example: near a bathtub, swimming pool, etc.
2. Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventila-
tion.
3. Heat: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
4. Power Source: The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the appliance.
5. Power Cord Protection: Power cords should be routed so that they are not likely to be walked on or pinched by
items placed up or against them. It always best to have a clear area from where the cord exits the unit to where
it is plugged into an AC outlet.
6. Cleaning: The unit should be cleaned as needed with a soft, non-abrasive cloth.
7. Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled into any
openings or vents located on the product.
8. Attachments: Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection: Disconnect the unit from AC power during any electrical storm in the
immediate vacinity. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
resulting in a risk of fire or electric shock.
11. Damage Requiring Service: This unit should be serviced by qualified service personnel when:
a.The power supply cord or plug has been damaged.
b.Objects have fallen into or liquid has been spilled in the product enclosure.
c. The unit has been exposed to rain.
d.The unit has been dropped or the enclosure damaged.
e.The unit exhibits a marked change in performance or does not operate normally.
12. Servicing: The user should not attempt to service the unit beyond those methods described in the User's
Manual. Service methods not covered in the operating instructions should be referred to qualified service
personnel.