Filter
Top Products
14 DPF710K
Operating the homebase
Preliminary Connections
Prior to initial operation, connection must be made to the power source and the tab (“REMOVE THIS TAB”) on the right
side of the unit must be removed to enable backup battery operation.
Connecting the Power. Power to the homebase is provided by the AC-to-DC wall adapter which delivers +9VDC to
the DC input connector at the rear of the unit. Refer to the installation procedures outlined previously for the methods
involved inconnecting the wall adapter plug to the power input connector, and the routing and dressing of the adapter
power cable. The figure below illustrates a typical installation.
Inserting the Memory Card/USB Device. All of the memory devices attach at the left side of the homebase and can
consist of a USB Flash Memory, Compact Flash (CF) Memory Card, Multi-Media Card (MMC), Memory Stick (MS)
Card, Secure Digital (SD) Card , or and xD Card. All of these devices are inserted in their respective receptacles with
the label side facing to the rear.
DC Input
Connector
Cable Notch
Wall Outlet
AC-to-DC Wall
Adapter
homebase
(Rear View)
homebase
(Rear View)
USB Flash
Memory
Compact Flash
Memory (CF)
Secure Digital (SD),
Memory Stick (MS),
Multi-Media Card (MMC)
xD Card
Label Side
(Typical)