Filter
Top Products
English 13
Before Requesting Service
Symptoms Corrective Action
E is displayed Exceeds the maximum capacity (150 kg / 330 lb).
E-0 is displayed Exceeds the maximum capacity (150 kg / 330 lb).
Err is displayed Exceeds the maximum capacity (150 kg / 330 lb).
E-10 is displayed Pairing or unpairing has not completed correctly. Remove and reinstall
the batteries.
E-11 is displayed
H is displayed Exceeds the maximum capacity (150 kg / 330 lb).
is displayed Remove and reinstall the batteries. Or replace all four batteries with new
AA size alkaline batteries.
Nothing is displayed when
the setting switch is
pressed
The measurement
results are greatly
different from the
expected values.
Place the scale on a solid level surface.
Remove any foreign objects that might be touching the bottom of the
scale.
Measurement doesn't start
when I step on the scale.
Did you press the setting switch when stepping on the scale?
Place the scale on a hard floor, and press the setting switch before
measuring.
Maintaining the Scale
If the scale becomes dirty, soak a cloth in water or mild detergent, wring the cloth out thoroughly and
then wipe the scale clean.
After wiping away the dirt with the damp cloth, dry the scale using a soft, dry cloth.
Never use alcohol, benzene, thinner or other harsh chemicals to clean the scale.
Remove the batteries from the battery compartment, when the scale is not going to be used for a long
time