Filter
Top Products
3M
TM
Ranger
TM
Irrigation Fluid Warming System
English
12
Check the 3M
TM
Ranger
TM
system website to ensure you have the most recent version of this document. www.rangerfluidwarming.com reorder #202456B
Maintenance and Storage
Cleaning the Ranger Irrigation Fluid Warming Unit
Clean the Ranger irrigation uid warming unit on an as-needed basis.
CAUTION
1. To reduce the risks associated with cross-contamination:
• e cleaning tool provides only supercial cleaning, it does not disinfect or sterilize the interior of the
unit.
NOTICE
1. To avoid device damage:
• Do not immerse the warming unit in cleaning or sterilizing solutions. e unit is not liquid proof.
• Do not clean the warming unit with solvents. Damage to the case, label, and internal components
may result.
• Do not insert metallic instruments in the warming unit.
• Do not use abrasive materials or solutions to clean the heater plates.
• Do not allow spills to dry inside the unit, as this may make it more dicult to clean the unit.
:
1. Disconnect the Ranger irrigation uid warming unit from the power source.
2. Wipe the outside of the unit with warm, soapy water, nonabrasive cleaning solutions, dilute bleach, or
cold sterilants. Do not use abrasive materials.
3. Wipe with a dry, so cloth.
:
e Ranger hardware cleaning tool, is intended to clean both heating plates of the warming unit. It is not
necessary to disassemble the warming unit to use the tool.