23
SMS FUNCTIONS
SENDING NEW SMS MESSAGES
1. In standby mode, press SMS OR select then scroll to SMS then
press Scroll to User and press There are 3 features SMS
Received, SMS Write new?, SMS Written?
2. Scroll or to SMS Write new appears. Press to confirm.
3. Use keypad to key in the message content.
Each SMS message may contain a maximum 160 characters. Press or to
move cursor in the text field. The next digit entered will appear to the right of the
cursor. Press Delete to delete the digits at the left of the cursor. Hold down Delete to
delete all digits at the left of the cursor.
4. When finished, press OK and enter the information for No. and Terminal.
5. Press toconfirm all information in the message and select Send and save.
6. Press againto send the message. The display shows Sending.
7. If sending fails, the display will show Send error then show Send and Save. If you
press the message will be resent again. If you press Back, the FP106 will
return and by mode. If the message is transmitted, the display shows Send OK and
return to written mode.
1) You must enter the receiver’s telephone number when sending an SMS. Other
information can be omitted.
2) You can select Load from phonebook to recall the phone book records.
3) Press to switch ABC/abc
4) Press to choose specific characters.
5) When you are writing an SMS message and the ring is coming, the message will
store on the "Written" box. You can retrieve the unfinished message from the
"Written" box.
menu
ok
ok
ok
ok
ok
ok
am
pm
