18
FEATURE BUTTONS
USING THE PRE-PROGRAMMED FEATURES BUTTONS
Easy access to some of most popular network service features have been
programmed into the telephone for your convenience.
If you subscribe to Call Waiting service, Call Waiting lets you know if you have another
call while you are already on the phone. Call Waiting sends a discrete tone when you
have another call.
A discrete tone tell you someone's calling you when you're on another call.
However, you have longer than this to answer the second call. The second caller
simply hears a ringing tone and will usually keep holding for six to eight rings.
Excuse yourself from the first caller, then press the button on your phone.
You can then talk to the second caller.
Toreturn to the first caller, simply press the button again and you will be
able to continue your original conversation.
CALL WAITING
!
!
!
MESSAGES
TelstraHome Messages 101 is a free, easy-to-use home message solution that allows
voice messages to be left for you when you are away from the phone, on another call
or dialled up to the Internet. All you have to do is dial 101 from your Telstrahome
phone to collect up to 10 messages at a time.
TelstraHome Messages 101 has a standard greeting and NO PIN number.
The phone will ring for approximately 20 seconds before TelstraHome Messages 101
takes the call.
Tochange the length of time before Telstra Home Messages 101 answers an incoming
call, dial *99 and enter the number of seconds you would like the phone to ring
(amount must be between 05 and 60 seconds). Then press
When you have a message you will hear the Stutter Dial Tone when you pick up the
phone receiver.
When a new message has been left in your mailbox, the will flash on the
display.
1. Press the button.
2. Enter your PIN at the prompt and follow the
recorded instructions.
When you have cleared the message (from any phone), the
Message icon will turn off.
To Use Messages feature:
There may be
a delay in
these
indicators
turning off.
callwaiting
callwaiting
messages
pm
