-42-
Key Format:
Hexadecimal and
ASCII formats are provided Hexadecimal format
stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the
specified length. ASCII format stands for any combination of keyboard
characters in the specified length.
Key Selected:
You can select the key based on need.
WEP Key:
Select which of the four keys will be used and enter the matching WEP key
that you create. Make sure these values are identical on all wireless
stations in your network.
Key Type:
You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
64-bit -
You can enter 10 hexadecimal digits (any combination of 0-9, a-f,
A-F, zero key is not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f,
A-F, zero key is not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f,
A-F, zero key is not promoted) or 16 ASCII characters.
Tips:
● The modification of the Wireless Setting will take effect only after the router is rebooted.
● The WEP Auth type is not supported by 802.11n mode.
● The TKIP is not supported by 802.11n mode. The TKIP cannot be selected if 11n only mode is
selected. The router will not work in 11n mode if bgn mixed mode and TKIP encryption are both
selected. TKIP is an encryption option of the WPA-PSK/WPA2-PSK2 and WPA/WPA2 Auth type.
3.2.1.2 Multi-SSID
On this page you can configure the Multi-SSID..
Choose the menu Wireless→Wireless Setting→Multi-SSID to load the following page.
