58
Settings and Adjustments
x CHROMA FILTER
This filter controls the level of the colour (Chroma)
element of the image's video signal to control colour
saturation level.
•
OFF: This turns off the chroma filter. The filter is
normally set to off.
• ON: This turns on the chroma filter and adjusts the
colour saturation level so that colours do not bleed.
Notes
• This function is not available when the player is set to output
progressive video signals.
• If you use the COMPONENT VIDEO OUT connectors, set
“CHROMA FILTER” to “OFF” to maintain accurate colour
reproduction.
x PLAYBACK MEMORY
The player can store the SUBTITLE, VIDEO CONTROL
and other settings of each disc for up to 300 discs
(Playback Memory).
Set the Playback Memory function on or off.
•
ON : stores the settings in memory when you eject the
disc or when you press ?/1 on the remote and the
player enters the standby mode with the disc still in the
player.
• OFF : does not store the settings in memory.
The following settings are stored in memory by the
Playback Memory function.
– AUDIO (page 35)*
– SUBTITLE (page 37)*
– ANGLE (page 37)*
– VIDEO CONTROL (page 38)
* DVD only
Notes
• The player can store the settings of up to 300 discs. When you
store the setting of disc number 301, the first disc setting is
canceled.
• Depending on the DVD, the information stored in the disc
takes priority over the Playback Memory settings and the
function does not work.
• Do not turn off the player by pressing POWER. Doing so may
cancel the settings. When you turn off the player, press x first
to stop playback and then press ?/1 on the remote. After the
power indicator lights up in red and the player enters standby
mode, press POWER on the player.
x PARENTAL CONTROL,
Sets a password and playback limitation level for DVDs
with playback limitation for children.
The same password is used for both Parental Control and
Custom Parental Control (page 43) .
For details, see “Limiting Playback by Children (Parental
Control) .”
x AUTO PLAY
Selects the Auto Play setting when you connect the mains
lead to the mains.
•
OFF: does not use “TIMER,” “DEMO1” or “DEMO2” to
start playback.
• TIMER: starts playing when the player is turned on, or
at any time you want when connected to a timer (not
supplied). Set the timer when the player is in standby
mode (the power indicator lights up in red).
• DEMO1: starts playing the first demonstration
automatically.
• DEMO2: starts playing the second demonstration
automatically.
x DIMMER
Adjusts the lighting of the front panel display and
indicators.
•
BRIGHT: makes the front panel display bright.
• DARK: makes the front panel display dark.
• AUTO DARK: If you do not operate the player or
remote for a short while, the front panel display
becomes dark.
• AUTO OFF: If you do not operate the player or remote
for a short while, the front panel display turns off.
• OFF: This turns off the front panel display.
zYou can directly turn on/off the front panel display by using
the remote
By pressing FL ON/OFF on the remote, you can turn on/off the
front panel display regardless the “DIMMER” setting (except
when it it set to OFF).
x PAUSE MODE (DVD only)
Selects the picture in pause mode.
•
AUTO: Moving subjects are output with no jitter, and
still objects are shown at high resolution. The picture
remains clear even during slow playback when using
the shuttle ring (Clear Frame function). Normally select
this position.
• FIELD: A picture including subjects that move is output
with less jitter but at a lower resolution than “FRAME.”
• FRAME: A picture including subjects that do not move
dynamically is output with high resolution.
Custom Settings (CUSTOM SETUP)
