A SERVICE OF

logo

24
D
Connecting to an AV amplifier (receiver) with a digital input jack having a
Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder
function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects
of this player.
PCM/DTS/MPEG/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL
R-AUDIO-L VIDEO
DIGITAL OUT LINE OUT
C
R
C
B
Y
OPTICAL
D
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
Note
After you have completed the connection, be sure
to set “DOLBY DIGITAL” to “DOLBY
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 25). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
“MPEG” (page 63). Otherwise, no sound or a loud
noise will come from the speakers.
l : Signal flow
CD/DVD player
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(DVP-NS415 only)
[Speakers]
to DIGITAL OUT
(COAXIAL or OPTICAL)
[Speakers]
or
Rear (L)
Rear (R)
Subwoofer
Centre
Front (L)
Front (R)
AV amplifier (receiver) having
a decoder
Coaxial digital cord
(not supplied)
to optical digital input
to coaxial digital input