22
B
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting
to an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
B-1
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
B-2
.
In this case, you can also connect the player directly to the MD deck or DAT deck without
using your stereo amplifier (receiver).
PCM/DTS/MPEG/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL
R-AUDIO-L VIDEO
DIGITAL OUT LINE OUT
C
R
C
B
Y
OPTICAL
B-2
B-1
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R-AUDIO-L VIDEO
LINE OUT
Note
If you select one of the TVS effects (page 45)
while playing a disc, no sound will come from
your speakers with the
B-2
connection.
l : Signal flow
◆Recommended surround sound effects for
the
B-1
connection only
• TVS STANDARD (page 46)
z Hint
In connection
B-1
, you can use the supplied
audio/video cord instead of using a separate audio
cord.
CD/DVD player
Coaxial digital
cord (not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(DVP-NS415 only)
[Speakers]
to coaxial or optical digital
input
Front (R)
Front (L)
Stereo audio cord
(not supplied)
(red)(white)
(red)
(white)
to LINE OUT L/R (AUDIO)
to audio input
to DIGITAL OUT
(COAXIAL or OPTICAL)
Stereo amplifier (receiver)
MD deck/DAT deck
or
or
