145
“Memory Stick” Operations
You can play back moving pictures recorded on a “Memory Stick.” You can also play
back 6 images including still images in order at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press PLAY. The last recorded image is displayed.
(3) Press +/– to select the desired moving pictures. To see the previous picture,
press –. To see the next picture, press +.
(4) Press MPEG N X to start playback.
(5) Press VOL–/VOL+ to adjust the volume
– : To turn down
+ : To turn up
To stop MPEG movie playback
Press MPEG N X.
To play back recorded images on a TV screen
•Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before operation.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
When no image is recorded on the “Memory Stick”
The message “ NO FILE” appears.
Moving picture
You can select moving pictures also with –/+ on PAGE1/PAGE2/PAGE3.
Viewing a moving picture
– MPEG movie playback
1
2
PLAY
POWER
MEMORY
VCR
CAMERA
OFF
(CHARGE)
LOCK
LOCK
