4-20
GS ( C pL pH m fn b d1 d2 d3 <Function 6>
[Format] ASCII GS ( C pL pH m
fn
b d1 d2 d3
Hex 1D 28 43 06 00 00 fn 00 43 4C 52
Decimal 29
40 67 6 0 0 fn 0 67 76 82
[Range] (p
L + pH x 256) = 6 (pL = 6, pH = 0)
m = 0
fn = 6, 54
b = 0
d1 = 67
d2 = 76
d3 = 82
[Description] The printer deletes all records stored in the NV user memory.
- All area is changed to unused area.
GS ( D
[Name] Enable/disable real-time command
[Format] ASCII GS ( D p
L pH m [a1 b1]...[ak bk]
Hex 1D 28 44 p
L pH 14 [a1 b1]...[ak bk]
Decimal 29 40 68 p
L pH 20 [a1 b1]...[ak bk]
[Range] (p
L + pH x 256) = 3, 5 (pL = 3, 5, pH = 0)
m = 20
a = 1
b = 0, 1, 48, 49
[Default] a = 1/ b = 1 (DLE DC4 fn m t ( n = 1): enable)
[Description] Specifies enable or disable of a real-time command.
- p
L, pH sets the number of parameters after pH (m and [a1 b1]...[ak bk]) to (pL + pH x 256)
bytes.
- a specifies the type of real-time command.
- b specifies enable/disable of real-time command processing.
a b Real-time command type
0, 48
Disable DLE DC4 n m t ( n = 1): output a specified pulse in real-time
(It does not process)
1
1, 49
Enable DLE DC4 n m t ( n = 1): output a specified pulse in real-time
(It does process)
DLE DC4 n m t (n=1): output a specified pulse in real-time.
GS ( E
[Name] User setup commands
[Format] ASCII GS ( E p
L pH fn [parameters]
Hex 1D 28 45 p
L pH fn [parameters]
Decimal 29 40 69 p
L pH fn [parameters]
[Description] Controls the user setting modes. The table below explains the functions available in this command.
- The value of fn specifies the function.
fn Function
1 Function1 Changes into the user setting mode
2 Function2 Ends user setting mode session. (Performs a software reset.)
3 Function3 Changes the Memory Switch
4 Function4 Transmits the host the value for the Memory Switch
5 Function5 Changes the customized setting values
6 Function6 Transmits the customized setting values
11 Function11 Sets communication condition of serial interface
12 Function12 Transmits communication condition of serial interface
- pL and pH specify the number of bytes for the parameters following pH (fn and [a1 b1] ...
[ak bk]) as(p
L + pH x 256).
