Setting Up
_49
07 SETTING UP
To setup the camera
1
Click <SYSTEM>
<CAMERA>.
You can select one from <Image Flip>,
<Image>, <White Balance>,
<Exposure Mode>, <
Adaptive Lighting Mode
>,
<Power Line>, <Saturation> and <Detail>.
2
To complete the setting,
click the [Apply] button.
<Image Flip>: Images can be flipped horizontally or vertically.
<Image>: Images can be set to color or black and-white.
<White Balance>: Color casts can be adjusted so that images in white can normally be seen at any
color temperature.
<Auto>: The camera can automatically adjust the color temperature in real time
according to changes in surroundings. The range of color temperature
that can be adjusted is approx. 2000K – 8000K.
<Daylight>: A mode set to a color temperature of 6500K.
<Tungsten>: A mode set to a color temperature of 2800K.
<Office fluorescent>: A mode set to a color temperature of 4000K.
<Fluorescent>: A mode set to a color temperature of 4500K.
<Horizontal>: A mode set to a color temperature of 2000K.
<Exposure Mode>: The level of exposure can be adjusted by selecting Auto or Manual. (Settings:
Auto, Manual (0,1,2,3,4))
<Auto>: Supports the optimum exposure level.
<Manual>: A desired exposure level (0 – 4) can be set according to surroundings.
<Adaptive Lighting Mode>: It can improve the lighting effect by increasing the intensity of the light.
<Off>: A mode in which the backlight function is turned off.
<Normal>: A mode in which both the dark and bright areas are adjusted
according to the surroundings.
<Backlit>: A mode in which the backlight adjustment function is
enhanced.
<Power Line>:
The power frequency can be set to 50 Hz or 60 Hz.
<Saturation>: The screen image can be adjusted to desired saturation. (Settings: 0,1,2,3,4,5,6,7,8,9)
<Detail>:
Horizontal and vertical sharpness can be adjusted. (Settings: 0,1,2,3,4,5,6,7,8,9)
NA-M300-ENG_AB68-00721A.indd 49 2008-11-17 오후 5:33:10
