A SERVICE OF

logo

Installation and Connection
_13
02
INSTALLATION AND CONNECTION
Connecting Power
1
Connect the power adapter to the camera’s power port.
2
Using a flathead screwdriver, connect the two lines leading from the power adapter to the
camera’s power port.
3
Connect the power cord to the power adapter unit.
4
Connect the power plug to a power outlet.
Beware of DC 12V’s polarity charges when making the connection.
If you are using a PoE (Power over Ethernet) supporting router, you do not need a separate
power source.
NA-M300-ENG_AB68-00721A.indd 13 2008-11-17 오후 5:33:04