A SERVICE OF

logo

Open as PDF
next previous
Care and Maintenance 5-5
3. Turn the platen roller with your fingers and run a dry, lint-free cloth
across the pinch and feed rollers as they turn. Make sure the rollers
are clean all the way around. If that does not work, use a cloth
dampened slightly with distilled water.
4. Reload the supplies after the printer dries.
Black Mark Sensor
To clean the black mark sensor:
1. Turn the printer off and open the supply cover.
2. Remove the supplies. See “Removing Supplies” in Chapter 3.
3. Clean the black mark sensor with a dry cotton swab.
4. Reload the supplies and close the supply cover.
Scanner Window
Clean the scanner window whenever it appears to be dirty or smeared.
To clean it:
1. Moisten a soft cloth with water.
2. Wipe the window until it is completely clean.
Black Mark
Sensor