A SERVICE OF

logo

Open as PDF
next previous
3-6 Using Supplies
H. Close the cover and press ESC to exit.
Loading for Non-Peel Mode
To load supplies for non-peel mode:
A. Feed the supply under the applicator roller and over the label
deflector.
B. Close the cover.
C. Press ESC to exit.
Removing Supplies
To remove supplies:
1. Peel mode only. Tear the backing paper just above the pinch roller.
2. Open the supply cover completely.
3. Spread the supply holder tabs apart with one hand and remove the
supply roll.
4. Peel mode only. Carefully pull out the supply backing paper still in
place between the pinch and feed rollers.
Applicator Roller
Label Deflector