How to Use Menu Functions
44
Menu
Item Adjustments / Configurations (alternatives)
Sound
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial
effects.
[V-Audio ProSurround]:
Provides a more progressive enhancer and reverberation to simulate improved
spatial effects.
Auto Gain Control
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Volume Correction Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Preferred Audio
Language
/
Selects the preferred language for digital TV multi audio (depending on the
broadcaster) [English] / [Maori] / [French] / [German] / [Italian] / [Spanish] /
[Korean] / [Chinese-Mandarin] / [Chinese-Cantonese] / [Japanese] / [Hindi]
MPX
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
●
For Analogue TV
Digital Audio
Preference
Selects the initial setting for audio tracks [Dolby D] / [MPEG]
[Dolby D]: The priority is given to Dolby Digital.
[MPEG]: The priority is given to MPEG.
●
Dolby Digital is the method of coding digital signals developed by the Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can also be
multi-channel audio.
●
MPEG is an audio compression method that compresses audio to the smaller
size without any considerable loss of audio quality.
●
For Digital TV
Digital Audio
Preference
/
Selects the initial setting for audio tracks [Dolby D] / [HE-AAC]
[Dolby D]: The priority is given to Dolby Digital.
[HE-AAC]: The priority is given to HE-AAC.
●
Dolby Digital is the method of coding digital signals developed by the Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can be multi-channel
audio.
●
HE-AAC is a perceptual coding method used to compress digital audio for
efficient storage and transmission.
●
For Digital TV
