FAQs
107
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
White spots or shadow images (noise)
●
Check the position, direction, and connection of the aerial.
Neither image nor sound is produced
●
Check the TV is turned on.
●
Check the mains lead is plugged into the TV and the socket outlet.
●
Check the TV is in AV mode.
●
Check the correct input mode is selected.
●
Check the Picture Menu (p. 41 - 43) and volume.
●
Check all required cables and connections are firmly in place.
Black and white picture
●
Check that the output of the external equipment matches the input of the TV.
[VIERA Link] function does not work and an error message appears
●
Confirm the connection. (p. 88, 89)
●
Turn the connected equipment on and then switch the TV on. (p. 90)
The screen becomes dim
●
This occurs when the contrast is lowered automatically to avoid image retention in the following conditions without
any user operation for a few minutes:
•
No signal in Digital TV or AV mode
•
Selected locked channel
•
Selected invalid channel
•
Selected radio channel
•
Displayed menu
•
Thumbnail or still picture
Pixel Statement
●
An image on a LCD or Plasma TV screen is created by many small groups of dots known as pixels (which is
similar to the image in a newspaper). It also naturally follows that higher panel resolutions contain more pixels.
To create a colour image, each pixel consists of three tiny coloured dots (known as sub-pixels), one each of red,
green and blue. Each one of these dots is precisely controlled by the electronics of the TV to produce the picture.
Whilst Panasonic maintains the highest standards in manufacturing technology and processes in the construction
of these panels, there are a number of allowable pixel/subpixel failures that still allow the panel to be defined as a
good panel. It is not possible to guarantee absolutely no pixel loss.
Problem Causes / Actions
Screen
Chaotic image, noisy
●
Set [P-NR] in the Picture Menu to remove noise. (p. 42)
●
Check nearby electrical products (car, motorcycle, fluorescent lamp).
No image can be
displayed
●
Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?
(p. 41)
●
Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to
match the output of the external equipment. (p. 30)
Blurry or distorted image
(no sound or low volume)
●
Reset channels. (p. 51, 52)
Unusual image is
displayed
●
Turn the TV off with Mains power On / Off switch, then turn it on again.
●
If the problem persists, initialise all settings. [Shipping Condition] (p. 57)
[Shop] appears on screen
at switch on
●
[Shop] was selected in [Auto Tuning] (p. 19)
Reset settings in [Shipping Condition] (p. 57), then select [Home] in [Auto
Tuning] (p. 19)
