A SERVICE OF

logo

Battery Charge
Place the handset on the charger
and charge for about 15 hours
before initial use.
The CHARGE indicator lights, a beep
sounds and Charging will be
displayed.
Note: If a fully charged battery is disconnected from the unit and plugged in again,
the LCD display will show
“”. Charge the battery for about 15 hours to obtain
full strength.
CHARGE Indicator
Connection
USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G).
The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
8
Installation
AC Adaptor
Power Outlet
(AC 120 V, 60 Hz)
Battery strength
You can check the battery strength on the handset display.
The battery strength is as shown in the chart below.
Display prompt Battery strength
Fully charged
Medium
Low
Needs to be recharged.(ashing)
Discharged