55
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Line mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
The system is preset to “A”.
1. Follow steps 1 to 4 of “Dialing mode” on page 54.
2. Scroll to “Set line mode” by pressing Öor
Ñ, and press á.
3.
For KX-TG2700/KX-TG2730 users:
Go to step 4.
For KX-TG2720/KX-TG2740 users:
Press Ö(Line 1) or Ñ(Line 2) to select the
line.
4. Select “B” or “A” by pressing Öor Ñ, and
press the soft key ( ).
Flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. The system is preset to “700 ms”.
1. Follow steps 1 to 4 of “Dialing mode” on page 54.
2. Scroll to “Set flash time” by pressing Öor
Ñ, and press á.
3.
For KX-TG2700/KX-TG2730 users:
Go to step 4.
For KX-TG2720/KX-TG2740 users:
Press Ö(Line 1) or Ñ(Line 2) to select the
line.
4. Select the desired time by pressing Öor Ñ,
and press the soft key ( ).
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
SAVE
SAVE
Set flash time
H
Set line mode
---------------
Set dial mode
H
Set flash time
Set line mode
SAVE
Set line mode
Incomin
:A
GF
Ex. Registered to
KX-TG2700/KX-TG2730
SAVE
Set flash time
Incom
:700ms
GF
Ex. Registered to
KX-TG2700/KX-TG2730
