A SERVICE OF

logo

2.9.6 After Site Survey
After obtaining the
proper measurement results, exit Radio Signal Test mode before connecting the CS to the
PBX.
1. Hold down the POWER button on the PS until the PS is turned OFF.
2. Disconnect the CS from the AC adaptor/battery box or the CSIF/DLC/DHLC card to stop supplying
electricity.
KX-TDA0151/KX-TDA0152
KX-TDA0141/KX-TDA0142
3. Switch all DIP switches on the CS from ON to OFF.
KX-TDA0151/KX-TDA0152
12345 6
OFF
ON
KX-TDA0141/KX-TDA0142
1
2
3
4
5
6
OFF ON
Installation Manual 197
2.9.6 After Site Survey