2.9 Connection of 2.4 GHz Portable Stations
2.9.1 Overview
Required Equipment and Maximum Number of Calls
CSs
determine the
area covered by the wireless system. The number of calls that can be made simultaneously
through each CS varies depending on the model, as follows:
CS Connection Card Maximum Calls Compatible PSs
KX-TDA0151 DHLC/DLC 2
• KX-TD7684
• KX-TD7694
• KX-TD7680
• KX-TD7690
KX-TDA0152 CSIF 3
KX-TDA0141 DHLC/DLC 2
KX-TDA0142 CSIF 3
Note
For more details about the PS, refer to the Operating Instructions of the PS.
Required Distances between Equipment
CAUTION
• Keeping some distance between the equipment listed below may prevent interference. (The distance
may vary depending on the environment.)
Equipment Distance
CS and office equipment such as a computer, telex, fax
machine, etc.
More than 2 m
CS and PS More than 1 m
Each PS More than 0.5 m
PBX and CS More than 2 m
CS and CS More than 15 m
*1
*1
KX-TDA0151CN: More than 3 m
• The CS should be kept free of dust, moisture, high temperature (more than 40 °C), low temperature
(less than 0 °C), and vibration, and should not be exposed to direct sunlight.
• The CS should not be placed outdoors (use indoors).
• The CS should not be placed near high-voltage equipment.
• The CS should not be placed on a metal object.
• Systems using 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere with the KX-TDA/
KX-TDE wireless system. Examples of such systems are cordless telephones, wireless LAN, Home
RF, microwave ovens and other ISM devices. These systems may cause minor noise.
Notice
Please take into
consideration the distance between the CSs when site planning. Please consult a certified
dealer for details.
182 Installation Manual
2.9.1 Overview
