Features 3-7
3 Features B
Busy Lamp Field
Description The LED (Light Emitting Diode) indicators of the DSS (Direct
Station Selection) buttons, corresponding to selected extensions,
show whether the extensions are idle or busy.
Conditions • This function is available for flexible CO buttons assigned as DSS
buttons on proprietary telephones and DSS buttons on DSS Consoles.
• A DSS button indicator lights red if the corresponding extension is busy.
Programming Reference
Station Programming RRRRRRRRRR User Manual
Flexible Button Assignment – Direct Station Selection (DSS) Button
Feature Reference Section 3, Features
Button, Direct Station Selection (DSS)
Operation References Not applicable.
Busy Station Signaling (BSS)
Description When attempting to call a busy extension, Busy Station Signaling
allows you to signal the extension to answer your call. The called
extension user hears a Call Waiting tone and then is able to answer
the call.
Condition • This feature only works if the called extension has activated Call
Waiting. If Call Waiting is activated, the caller will hear a ringback tone.
If not, the caller will hear a reorder tone.
Programming References
No programming required.
Feature Reference Section 3, Features
Call Waiting
Operation Reference Telephone Features
— User Manual Busy Station Signaling (BSS)
