A SERVICE OF

logo

4-32 System Programming
4.2 System Programming
Flash Mode for a Station Locked Extension
108
Description Assigns whether or not an extension where the electronic station
lockout or remote station lock control feature has been set, can send
a flash signal during a conversation with an external party.
Selection Enable / Disable
Default Disable
Programming 1. Enter 108.
Display: Locked Ext Flash
2. Press NEXT.
Display example: FLASH:Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature References Section 3, Features
Electronic Station Lockout
Remote Station Lock Control