Operation
User Manual 89
• A call can only be forwarded to one target telephone. For example, extension A's call is
forwarded to extension B. Extension B's call is forwarded to extension C. A call to extension
A is forwarded to extension B, but the call would not be forwarded directly to extension C
from A.
• The extension which is set as the destination can call the original extension.
• While setting, you can temporarily cancel this feature by pressing the FWD/DND button.
Pressing the FWD/DND button alternates between setting or cancelling the mode.
• You can set the "Do Not Disturb (DND)" and "Call Forwarding (FWD)" features at the same
time. However, only one feature will work at a time. Pressing the FWD/DND button while
on-hook changes the feature as follows:
• The FWD/DND button light shows the current status as follows:
4.1 Customising Your Phone (Station Programming)
• 4.1.2 Customising the Buttons
Create or re-arrange an FWD/DND button.
4.3 Customising Your System (User Programming)
• 4.3.5 Flexible CO Button Assignment (005)
one step
one step
A
B C
DND FWD OFF
Off: Both features are not set.
Red on: DND mode
Flashing red: FWD mode
This setting can be changed
by System Programming.
