
Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 239
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters. The following table reflects which keys to
use.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Press the
AUTO
key.
OR...
Enter the Speed Dial Originate code (default =
80
).
4. Enter the PSD bin number (
80-99
).
5. Complete the call and replace the handset or press the
ON/
OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default =
710
).
3. Enter the PSD bin number (
80-99
).
4. Press the
HOLD
key.
5. Replace the handset or press the
ON/OFF
key.
To indicate . . . Enter/Press
Digit or character
0
,
1
-
9
,
*
,
#
Intercom Level *
AUTO * #
MCO Code **
AUTO * 0
Pause
REDIAL
DP - DTMF Code
AUTO * *
SSD Code
AUTO NN(N)
Hyphen (-)
PROG