142
Message Cause Corrective Action
• The printer cover is open.
• The power may have been turned on
with the cover open.
• An error has occurred.
• There is unnecessary paper remaining
in the printer.
• The power may have been turned off
during the previous printing.
• The temperature of the thermal head is
too high.
• Paper has become jammed in the
printer.
• Properly close the printer cover.
• Turn off the power, close the cover
and then turn the power back on again.
• Contact the nearest service department
of Olympus.
• Remove the unnecessary paper.
• Remove the paper cassette, turn off the
power and then turn it back on again.
• Wait 30 - 100 seconds until the
thermal head cools.
• Printing resumes automatically after
the thermal head has cooled.
• Stop printing and remove the jammed
paper.
