• To add index marks, the index
function must be registered to the Fn
button (☞ P.74).
Setting an index mark
If index marks is placed, you can quickly find a
location you want to listen to in fast forward and
fast rewind and when cuing a file. Index marks
can be added only during PCM recording with
this recorder or to PCM files recorded using this
recorder.
1 Press the Fn button at the position you
want to add an index mark.
• A number appears on the sub LCD and an
index mark will be placed.
• Even after an index mark is placed,
recording, shooting or playback will
continue so you can place index marks in
other locations in a similar manner.
Setting an index mark A
Clearing an index mark
1 Select a file in which index marks you
wish to erase are contained.
2 Press the 9 or 0 button to select
the index mark to erase.
3 While the index number is displayed
for approximately 2 seconds on the
sub LCD, press the ERASE button.
• The index mark is erased.
•
Index numbers after the erased index
number will be automatically decreased by 1.
Notes
• During recording or playback, the main LCD is
off.
• Up to 16 index marks can be set in a file. If you
try to place more than 16 index marks, the
[Index Full] message will appear for index
marks.
• Index marks cannot be set or erased in a locked
file (☞ P.72).
• An index mark cannot be added to a movie file
shot with the recorder or a file in MP3 format.
Setting an index mark
A
