To connect the USB 2.0 Super Multi-Burner Drive to your system using self power with AC adapters, do
the following:
Note: The illustration on the left applies to US/Canada/Latin America/Japan.
Note: The illustration on the right applies to all other countries.
1. Turn on your computer.
2. Using the USB cable, insert the cable plug 2 into the USB connector
of the drive. Plug the
power supply4 into an outlet.
3. Connect the AC adapter to the DC IN connector1 on the USB 2.0 Super Multi-Burner Drive.
4. Plug the standard USB connector 3into the USB port of your computer.
Configuration 2: Connecting the drive using standard USB bus power
(Limited Speed Operation)
Requirements
v Two Standard USB cables (shipped with this option).
v Two free USB ports available on your system.
Specifications
Read and write of CD and DVD media are supported.
Read speeds for Configuration 2
Media Max speed with USB Standard Bus Power
DVD-ROM (Single layer) 4x CAV
DVD-R (4.7 GB) 4x
DVD+R 4x
CD-ROM 10x
CD-R 10x
CD-RW 10x
CD-DA (DAE) 10x CAV
Figure 1-1. Configuration 1: self power (AC adapter) configuration
Chapter 1. USB 2.0 Super Multi-Burner Drive 1-7
