10
◆ Even when setting the volume to 0, the transceiver will continue
to emit beep sounds and channel announcements.
◆ Continuously transmitting when the transceiver becomes too
hot will cause the output power to decrease and may eventually
stop transmission. Stop transmitting for a while to allow the
transceiver to cool down.
◆ You may sometimes hear noise during communications,
depending on the caller’s transceiver.
LED INDICATOR STATUS
Indicator Color Meaning
Red Transmitting
Green Receiving a call
Blinking green Scanning
Blinks light blue 1 time Standby state *
Blinking red Battery power is low
* The transceiver has not been used for at least 10 seconds.
BATTERY LEVEL GUIDE
You can determine the remaining battery power level by
pressing the Power switch while the transceiver power is
ON. The LED indicator will blink blue a number of times
corresponding to the battery power remaining.
Indicator Status Battery Level
Blinks 3 times High
Blinks 2 times Medium
Blinks 1 time Low
TIME-OUT TIMER (TOT)
The Time-out Timer prevents callers from using a channel for
an extended duration (60 seconds). If you continuously transmit
for the duration, transmission will stop and an alert tone will
sound. To stop the tone, release the PTT switch.
