English - 73
MAINTENANCE
If long blades of grass or other objects nd their way in,
these may impede the blade disc. Even a slight braking
effect leads to a higher consumption of energy and
longer mowing times, and at worst will prevent the robotic
lawnmower from being able to mow a large lawn. The
blade disc must be removed to carry out a more thorough
cleaning. If necessary, contact your dealer.
Chassis
Clean the underside of the chassis. Brush or wipe with
a damp cloth.
Wheels
Clean around the front wheel and rear wheels as well as
the front wheel bracket.
Body
Use a damp, soft sponge or cloth to clean the body. If
the body is very dirty it may be necessary to use a soap
solution or washing-up liquid.
Charging station
Clean the charging station regularly from grass, leaves,
twigs and other objects that may impede docking.
8.5 Transport and moving
Secure the machine during transport. It is important that
the robotic lawnmower does not move when it is being
transported, for instance, between lawns.
8.6 In the event of a thunderstorm
To reduce the risk of damage to electrical components
in the robotic lawnmower and its charging station, we
recommend that all connections to the charging station
are disconnected (power supply, boundary wire and guide
wires) if there is a risk of a thunderstorm.
1. Make a careful note of which wire is connected
where. The charging station’s connections are
marked AR, AL, G1, G2.
2. Disconnect all wires.
3. Close the cover to the charging station to protect
the connections from rain.
4. Connect all the wires if there is no longer a risk
of thunder. It is important that each wire is
connected to the right place.
3012-1069
2.
3012-1095
3012-1068
