Adjustments and functions (continued)
SET UP
Images and display positions can be adjusted from the SETUP menu.
RGB signal input Video signal input
[ ETUP INPUT /__
VOLUME _ E_
BRtGHT _ _
CONTRAST _
V POSIT 100
H POSIT
H PHASE
H SIZE 800
COLOR BALE
Adjustment item Adjustment description
VOLUME Volume decreases _ Volume increases
BRIGHT
(BRIGHTNESS) Darker _ Brighter
CONTRAST Lower contrast _ Stronger contrast
SHARPNESS Softer image _ Sharper image
COLOR Less _ More
TINT Redder _ Greener
V, POSIT
(V. POSITION) Moves the image up and down.
H, POSIT
(H. POSITION) Moves the image left and right.
H, PHASE Eliminates blanking.
H, SIZE Adjusts the horizontal size of the image.
COLOR BAL R
(COLORBALANCERed) Less red _ More red
COLOR BAL B
(COLORBALANCEBlue Less blue _ More blue
Using the SETUP Menu
Move the cursor to the item to be adjusted and move the MENU button of the projector or the DISK PAD
button of the remote control to change the length of the bar display.
(Caution) • The menu cannot be displayed while the initial screen ("No input is detected." or "Sync is
out of range.") is being displayed.
• Tint cannot be adjusted with PAL or SECAM video signal input.
• Tint, color and sharpness cannot be adjusted with RGB signal input.
• V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with video signal input.
• The MAGNIFY or FREEZE function will be cancelled after the operation "Menu".
• Displaying the menu cancels magnify and freeze operations.
18
