Basic operations (continued)
I Magnify function
Part of an image can be displayed magnified.
(refer to page 10)
5
S_
p _np MUTE
BL_NK AUTO TIMER
1 Press the MAGNIFY + button.
• The center part of the image wilt be displayed magnified approximately two times.
Changing the magnification ratio ]
Press the MAGNIFY + button.
• When this button is pressed, the image wilt be displayed even larger.
m4
j6
3 Press the MAGNIFY- button.
• When this button is pressed, the image wilt be displayed even smaller.
Moving the display area
4 Press the POSITION button.
5 Press the DISK PAD up, down, left and right buttons.
• The magnified area will move in accordance with the button pressed.
Returning to normal display I
6 Press the MAGNIFY OFF button.
_-Caution_ • When there is no video signal input, Magnify is not effective when the video signal input is
outside the sync range.
• The magnify function will be cancelled when the input select button is pressed or the display
mode of the PC being used for display is changed.
• The Magnify function will be cancelled after the operations such as "menu display
ON","FOCUS", "FREEZE", "P inP", "AUTO", "VOLUME/_ _/", "MUTE", and
"POSITION".
16
