Regarding the indicator lamps (continued)
The cooling fan is not operating.
Please turn the power off, and allow the
cool down at least 20 minutes.
suffi ciently cooled down, please make confi rmation
that no foreign matter has become caught in the fan,
etc., and then turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
There is a possibility that the interior portion
Please turn the power off, and allow the
cool down at least 20 minutes. After the projector has
suffi ciently cooled down, please make confi rmation of
the following items, and then turn the power on again.
Is there blockage of the air passage aperture?
Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please set FAN SPEED of the SERVICE item in the
There is a possibility that the interior portion
within the usage temperature
projector within the usage temperature projector
parameters (5°C to 35°C). After the remedy, reset the
It is time to clean the ai
Please immediately turn the power off, and clean or
change the air fi lter referring to the section “Air Filter”.
After cleaning or changing
to reset the fi lter timer. After the remedy, reset the
• When the interior portion has become overheated, for safety
purposes, the power source is automatically turned off, and the indicator lamps
may also be turned off. In such a case, press the “
” (OFF) side of the power
switch, and wait at least 45 minutes. After the projector has suffi ciently cooled
down, please make confi rmation of the attachment state of the lamp and lamp
cover, and then turn the power on again.
