A SERVICE OF

logo

Open as PDF
next previous
36
Multifunctional settings
OPTION Menu
Item
Description
AUTO SEARCH
Using the buttons ▲/▼
turns on/off the
automatic signal search
function
.
TURN ON
TURN OFF
This function works with INPUT, RGB, and VIDEO buttons.
When the TURN ON is selected, detecting no signal automatically
cycles through input ports
i
n
the following order
. The search is
started from the current port.
Then
when an input is found, the
projector will stop searching and display the image
.
RGB IN1
RGB IN2
COMPONENT VIDEO
S-VIDEO
VIDEO
AUTO OFF
Using the buttons ▲/▼ adjusts the
time to count down to
automatically turn the projector off
.
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)
AUT
O OF
F
ENABL
E
1
AUT
O OF
F
DISABLE
0
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will go off and the power indicator begins blinking. Please
refer to the section
“Turning off the power”
(
16
)
.
LAMP TIME
The lamp time is the time counted after the last resetting. It is
shown in the OPTION menu as the usage time of the lamp.
Pressing the RESET button on the remote control
or the button
►
of the projector
displays
of the projector displays of the projector
a dialog
.
To reset the lamp time
,
select the
RESET using the button ▲.
RESET
CANCEL
•
Please reset the lamp time
only when you have replaced the lamp
,
for a corresponding message about the lamp
.
•
For
the lamp
For the lamp For
replacement
, see the section "Lamp"
(
38, 39
)
.
FILTER TIME
The
fi lter time
is the time counted after the last resetting. It is shown
in the OPTION menu as the
usage
time of the
air fi lter
.
Pressing the RESET button on the remote control
or the button
►
of the projector
displays a dialog. To reset the fi lter time, select the
RESET using the button ▲.
RESET
CANCEL
•
Please reset the fi lter time only when you have
cleaned or
replaced
cleaned or replaced cleaned or
the
air fi lter
, for a corresponding message about the
air fi lter
.
•
For
the
For the For
air fi lter cleaning
,
see the section "
Air fi lter
"
(
40
)
.
With the OPTION menu, the items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the projector or
remote co
ntrol,
and press the cursor button ► on the projector
or remote control, or the ENTER button on the remote control to
execute the item
, except for the items LAMP TIME and FILTER
TIME. T
hen perform it referring to the following table.
 MENU [RGB]
 PICTURE
   :SELECT
 
 IMAGE
 SETUP
 INPUT
 OPTION
 EASY MENU
 SCREEN
 AUTO OFF      0
 LAMP TIME     0
 FILTER TIME   0
 AUTO SEARCH  TURN OFF
 SERVICE