82
On-Screen Display
Setup
7. Use the CURSOR PAD ̇ or ̈ to choose the
device you wish to learn. (Example: DVD 3)
8. Select NEXT to continue.
9. Select the DVD 3 softkey to learn.
(Example: PLAY ̈ button).
10. Select NEXT to continue.
11. Press and hold the ̈ “Play button” of the DVD
remote control while pointing directly at the
learning AV NET sensor of the LCD TV (located
at the lower right corner of the screen) at a
distance of 3 to 6 feet or 1 to 2 meters.
12. If the IR Code transfer was successful, the
screen below appears, then select “OK” to
continue setup.
13. Select another softkey to learn or select
“DONE” to move on to the next screen.
14. Select the Test button ̈ “Play button” to
check the response of the device to this
command.
15. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
16. Use the CURSOR PAD ̇ or ̈ to select the TV
Input that connects to the video and audio
output of the DVD.
17. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
18. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
